banner

Ihe nkiri nchekwa EMI nwere ezigbo mkpuchi

Ihe nkiri nchekwa EMI nwere ezigbo mkpuchi

Nkowa dị mkpirikpi:

EMI Film Shielding na -ejikarị eme ihe na FPC nke nwere Modulu maka ekwentị mkpanaaka, PC, ngwaọrụ ahụike, igwefoto dijitalụ, ngwa ụgbọ ala, wdg.


Nkọwa ngwaahịa

Mkpado ngwaahịa

Nkọwa ngwaahịa

EMI Film Shielding na -ejikarị eme ihe na FPC nke nwere Modulu maka ekwentị mkpanaaka, PC, ngwaọrụ ahụike, igwefoto dijitalụ, ngwa ụgbọ ala, wdg.

Nnweta ngwaahịa

LKES-800
LKES-1000
LEKS-6000

Atụmatụ Ngwaahịa

(1) Njirimara nhazi dị mma
(2) Ezi ọkụ eletrik
(3) Ihe nchekwa dị mma
(4) Ezi okpomọkụ eguzogide
(5) Enyi gburugburu ebe obibi (Halogen na -akwụghị ụgwọ, na -emezu ihe ntuziaka RoHS na REACH, wdg)

Nhazi ngwaahịa

Dry film

Njirimara ngwaahịa

 LKES -800

Ihe Data Ule Ụkpụrụ ule ma ọ bụ usoro ule
Oké (Tupu lamination, μm) 16±10% Ụkpụrụ ụlọ ọrụ
Ọkpụrụkpụ (Mgbe Lamination, μm) 13±10% Ụkpụrụ ụlọ ọrụ
Nguzogide Ala(Ọla edo, φ 1.0mm, 1.0cm, Ω) <1.0 JIS C5016 1994-7.1
Ike peeling nke ihe nkiri ewusiri ike (N/25mm) <0.3 Ụkpụrụ ụlọ ọrụ
Reflowing Soldering Reflow (MAX 265) Enweghị stratification; Enweghị ụfụfụ JIS C6471 1995-9.3
Onye ahịa (288, 10s, ugboro 3) Enweghị stratification; Enweghị ụfụfụ JIS C6471 1995-9.3
Njirimara ịchebe (dB) > 50 GB/T 30142-2013
Nguzogide elumΩ/ 350 Ụzọ njedebe anọ
Ire ọkụ VTM-0 UL94
Agwa mbipụta Gafere JIS K5600
Ebube(60°, Gs) 20 GB9754-88
 Chemical eguzogide(Acid, alkali na OSP) Gafere JIS C6471 1995-9.2
Nrapado na Stiffener (N/cm) 4 IPC-TM-650 2.4.9

LKES-1000

Ihe Data Ule Ụkpụrụ ule ma ọ bụ usoro ule
Ọkpụrụkpụ (Mgbe Lamination, μm) 14-18 Ụkpụrụ ụlọ ọrụ
Njirimara ịchebe (dB) 50 GB/T 30142-2013
Mkpuchi elu 200 Ụkpụrụ ụlọ ọrụ
Fastness nyagide (Nnwale mkpụrụ ndụ narị) Ọ nweghị sel ga -ada JIS C 6471 1995-8.1
Na -eguzogide nhichapụ mmanya Oge 50 enweghị mmebi Ụkpụrụ ụlọ ọrụ
Nguzogide ncha Ugboro ise ọ dịghị Leakage nke metal Ụkpụrụ ụlọ ọrụ
Nguzogide Ala, (mkpuchi ọla edo, φ 1.0mm, 1.0cm, Ω) 1.0 JIS C5016 1994-7.1
Reflowing Soldering Reflow (MAX 265) Enweghị stratification; Enweghị ụfụfụ JIS C6471 1995-9.3
Onye ahịa (288, 10s, ugboro 3) Enweghị stratification; Enweghị ụfụfụ JIS C6471 1995-9.3
Agwa mbipụta Gafere JIS K5600

LKES-6000

Ihe Data Ule Ụkpụrụ ule ma ọ bụ usoro ule
Ọkpụrụkpụ (Mgbe Lamination, μm) 13±10% Ụkpụrụ ụlọ ọrụ
Njirimara ịchebe (dB) 50 GB/T 30142-2013
Nguzogide Ala, (Gold plated, φ 1.0mm, 1.0cm, Ω) 0,5 JIS C5016 1994-7.1
Nguzogide Ala, (Gold plated, φ 1.0mm, 3.0cm, Ω) 0.20 JIS C5016 1994-7.1
Ike mwepụta (N/cm) <0.3 Ụkpụrụ ụlọ ọrụ
Mkpuchi elum 200 Ụkpụrụ ụlọ ọrụ
Fastness nyagide (Nnwale narị narị) Ọ nweghị sel ga -ada JIS C 6471 1995-8.1
Reflowing Soldering Reflow (MAX 265) Enweghị stratification; Enweghị ụfụfụ JIS C6471 1995-9.3
Onye ahịa (288, 10s, ugboro 3) Enweghị stratification; Enweghị ụfụfụ JIS C6471 1995-9.3
Ire ọkụ VTM-0 UL94
Agwa mbipụta Gafere JIS K5600

Ọnọdụ nhazi nhazi akwadoro

Usoro mkpuchi Ọnọdụ mkpuchi Solidification ọnọdụ

Okpomọkụ ()

Nrụgide (n'arọ)

Oge (s)

Okpomọkụ ()

Oge (min)

Ngwa-Lamination LKES800/6000: 180±10LKES1000: 175±5 100-120 Afọ 80-120 160±10 30-60

Rịba ama: Onye ahịa nwere ike ịhazigharị teknụzụ dabere na ezigbo ọnọdụ mgbe nhazi.
(1)Wepu mkpuchi mkpuchi mbụ, wee jikọọ na FPC, 80Enwere ike iji tebụl kpo oku maka njikọta tupu.
(2)Laminate dabere na usoro a dị n'elu, wepụta, wee wepụ ihe nkiri ahụ na -ebu mgbe emechara.
(3)Solidification usoro.

Mbukota

(1) Standard nkọwapụta ngwaahịa: 250mm × 100m.
(2) Mgbe ewepụsịrị ọkụ eletrik, ngwaahịa ndị ahụ juputara na mpempe akwụkwọ aluminom wee tinye draya n'ime ya.
(3) A na -akwakọba ya na katọn akwụkwọ wee debe ya iji hụ na nchekwa nke ngwaahịa n'oge njem na njikwa, ma zere mmebi.

Nchekwa na Ntị

(1 C Ọnọdụ Nchekwa akwadoro
Okpomọkụ: (0-10) ℃; Iru mmiri: n'okpuru 70%RH
(2) Ntị
(2.1) Biko emeghela ngwugwu dị na mpụga ma dozie ihe nkiri mkpuchi n'ime ụlọ okpomọkụ ruo awa 6 tupu i jiri ya belata mmetụta ntu oyi na igirigi na ihe nkiri mkpuchi.
(2.2.
(2.3) Ngwaahịa a anaghị eguzogide ndị na -ahụ maka akara mmiri na mmụba, ọ bụrụ na ịnwe teknụzụ nhazi dị n'elu, biko nwalee ma gosipụta nke mbụ.
(2.4 gest Na -atụ aro ka emechaa lamination ngwa ngwa, ọ dị mkpa ka a nwalee ma kwenye.
(2.5 period Oge nkwa ịdị mma n'okpuru ọnọdụ dị n'elu bụ ọnwa 6.


  • Nke gara aga:
  • Osote:

  • Dee ozi gị ebe a ma zitere anyị ya

    ngwaahịa ndị metụtara ya